Flip-Blade Insulated Screwdriver, 2-in1, Ph Bit #2, Sl Bit 1/4-Inch
$23.07
Description
Klein Tools’ Flip-Blade Insulated Screwdriver is two drivers in one tool. The auto-eject mechanism works with just a twist, allowing you to flip the #2 Phillips- to the 1/4-Inch Slotted-end of the blade simply and easily. A bright orange coating of insulation protects from electrical shock, as well as being flame and impact resistant. Klein insulated tools exceed the ASTM F1505 standards for insulated tools, and are clearly marked with the official 1000-Volt rating symbol.
Brochure
Feature
- Insulated Screwdriver Flip-Blade has a #2 Phillips end and a 1/4-Inch Slotted end
- Securely and easily release the blade with a quick twist of the lock collar
- Interchangeable blades with a slim-tip to fit tight terminal blocks
- Handle and blade have a 1000-Volt insulation rating
- A layer of orange impact and flame resistant insulation protects from electric shock
- Meets or exceeds ASTM F1505 standards for insulation
- Cushion-Gripâ„¢ handles for greater torque and comfort
- Double-ended blades have a 3.5-Inch shaft length out of handle
Warning
- Do NOT use screwdrivers to pry or chisel
- Always inspect your tools before use, destroy tool if insulation becomes damaged in any way
- Always adhere to local and national safety codes; use personal protective equipment to prevent shock and arc blast injury where hazardous live conductors are exposed
Additional information
| Handle Length | 4.7" (11.9 cm) |
|---|---|
| Handle Color | Black/Orange |
| Phillips Bits | #2 |
| Other Bits | — |
| Handle Material | Rubber, High-Dielectric Plastic |
| Slotted Bits | 1/4" (6.4 mm) |
| Type | Insulated Flip-Blade |
| Overall Width | 1.25" (3.2 cm) |
| Magnetic | No |
| Overall Height | 1.25" (3.2 cm) |
| Square Bits | — |
| Combo Bits | — |
| Overall Length | 8.2" (20.8 cm) |
| Weight | 4.1 oz (116 g) |
| TORX® Bits | — |
| Hex Bits | — |
| Number of Pieces | 2 |
| Special Features | Insulated, Interchangeable Blade |
| Application | Work Near Energized Sources |
| Shank Length | 3.5" (8.9 cm) |
| Insulated | Yes |
| Material | Induction Hardened Steel |
| Nut Driver Sizes | — |
| Handle Type | Cushion-grip |
| Standard | Meets or Exceeds ASTM F1505 |
| UPC | 092644322938 |
| UNSPSC | 27111701 |
Reviews
There are no reviews yet.