USB Digital Meter, USB-A and USB-C

Description

The Klein Tools ET920 is a USB digital meter for Type-A and Type-C ports. It accurately and reliably measures and displays the USB port voltage, current, capacity, energy, and resistance simultaneously. It can function with any USB-A and most USB-C ports, including Qualcomm Quick Charge® ports that have the ability to deliver power. It requires NO batteries as it draws power from the power source to function.

Brochure

Brochure 1

Instructions

Instructions 1

YouTube Video

Click Here to Download Video

Feature

1. 3 to 20V DC; Current: 0.05 to 3A (USB-A); 3 to 20V DC; Current: 0.05 to 5A (USB-C)
2. Continuously monitor up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated)
3. Tests most common standard USB-A or USB-C ports, including Qualcomm Quick Charge® ports
4. Store and recall up to 10 readings
5. Voltage and current overload detection
6. Hi-resolution LCD for clear visibility in environments with low ambient lighting
7. Device must be used in line between source being measured and power source
8. Rugged, pocket-sized, and light weight Klein industrial design stands up to jobsite demands
9. Built to withstand a 6.6-Foot (2m) drop
10. No batteries needed; powered by the USB port being tested

Warning

1. To ensure safe operation and service of this meter, follow all instructions. Failure to observe warnings can result in severe injury or death.
2. This meter will NOT display current below 50 milliamperes, even if it is allowing this to pass through. NOTE: The display will show zero current.
3. Do NOT use with ports that operate outside of the rated voltage and current. NEVER use on a circuit with voltage or current that exceeds the maximums specified for this device.