USB Digital Meter and Tester, USB-A (Type A)

Description

The Klein Tools ET910 is a USB digital meter and tester combination for most common USB-A ports, including Qualcomm Quick Charge® ports. It accurately and reliably measures and displays the USB port voltage, current, capacity, energy, and resistance simultaneously. It can also test the maximum current delivery capability of the USB port with built-in fixed loads so user need not connect to an external load. It will function with any USB-A port that has the ability to deliver power. It requires NO batteries as it draws power from the power source to function.

Brochure

Brochure 1

Instructions

Instructions 1

YouTube Video

Click Here to Download Video

Feature

1. 3 to 20V DC; Current: 0.05 to 3A (monitoring mode)
2. Built-in test loads of 0.5A, 1A, 2A, and 3A; no external test load required
3. Continuously monitor up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated)
4. Tests most common standard USB-A ports, including Qualcomm Quick Charge® ports
5. Store and recall up to 10 readings
6. Voltage and current overload detection
7. Hi-resolution LCD for clear visibility in environments with low ambient lighting
8. Durable cable to allow easy access to hard-to-reach ports
9. Rugged, pocket-sized, and light weight Klein industrial design stands up to jobsite demands
10. Built to withstand a 6.6-Foot (2m) drop

Warning

1. To ensure safe operation and service of this meter, follow all instructions. Failure to observe warnings can result in severe injury or death.
2. This meter will NOT display current below 50 milliamperes, even if it is allowing this to pass through. NOTE: The display will show zero current.
3. Do NOT use with ports that operate outside of the rated voltage and current. NEVER use on a circuit with voltage or current that exceeds the maximums specified for this device.